How to fix a motorcycle if it is worn out

When the motorcycle breaks down and is unable to move then people try to fix it and take it to the mechanic. I also went to a mechanic today. The condition of was very bad and the mechanic was working by opening the motorbike. The head of the motorbike was opened where there is a timing chain and he was trying to fix it.

The grating of the timing chain often breaks down, which can lead to engine failure if not repaired in time. The whole color pustum is repaired which comes at a cost but some days the motorbike has to be driven slowly and sleep has to be completed and the head is also worked with the head open.

There are sayings inside the head. They are often damaged. They are also repaired. When a motorbike is running, it catches fire. The bicycle will not run. The head is removed from the engine and then the work is done

In order to generate current, the motorcycle must be convinced and the one who generates the current and supplies the whole motorcycle, if it is not repaired, then the whole motorcycle does not get current and does not start. There are also touts inside it. Which do not allow the current to increase and keep full current so that the motorcycle light does not burn and the current does not increase or decrease

Garari seat motorcycle should be fine then the bike runs fine and if the oil is applied to the chain then the chain does not come down and the garari is also fine when the chain is happy then the garari seat is bad And then you don't have to get a new one. You can see for yourself the condition of this motorcycle's chain and gear set.

To operate a motorcycle, all keys, etc., should be kept close to the water and L so that you do not have to get up again and again. Don't get lost and keep all the keys from one number to the last number

The keys are numbered inside the shop and the keys are attached to them. The key should be taken off and the work of motorcycle or other vehicles should be done

If there is a need for air while working, there is also an air tank which is pressurized. Air is applied to the motorcycle inside and outside the engine. Comes out flying and cleans well

And if the net bolt is not opening and it is necessary to open it, then it is opened by placing it in the grip made of iron. It is very useful.

And by doing all this, the motorcycle gets better. If the motorcycle doesn't get better, then the next day the work on it continues and it is left after it is completely repaired. Are done