Hermosa pulsera tejida al estilo macrame // Beautiful bracelet woven in macrame style

avatar

Español

Hola mi hermosa comunidad de hive y mis queridos amigos de jewerly es un placer saludarlos nuevamente,agradecido con Dios principalmente por darme la oportunidad de estar nuevamente con ustedes,y con toda esa maravillosa gente que ha brindado ese apoyo en cada publicación que hago.
Hoy quiero mostrarles una bonita pulsera en tejido macrame,esta pulsera la he realizado con hilos reciclados,es maravilloso como se convierte en arte esas cosas que pensamos que no sirven cuando en realidad los podemos usar para hacer obras de arte,recuerden antes de deshacerse de cualquier material piensen en reciclar los y crear cosas bonitas como estas.

Los materiales utilizados para esta pulsera fueron los siguientes:

💫160CM DE HILO ROJO
💫160CM DE HILO AZUL
💫160CM DE HILO BLANCO
💫80CM DE HILO NARANJA GRUESO
💫1 TIJERA
💫1 YESQUERO
💫1 TABLA CON PINZA

Cabe destacar que los hilos que vas a utilizar pueden ser de el color que ustedes gusten,yo utilice estos colores para que se viera el trabajo realizado,pero mientras más coloridos mejor quedará.

Los pasos utizados para esta pulsera son los siguientes:

Paso 1
Lo primero que haremos es cortar los hilos de 160cm por la mitad y los clasificarnos según su color,luego hacemos un nudo y los colocamos en la tabla con pinzas y lo ajustamos

Lo siguiente es colocar nuestro hilo anaranjado el más grueso de todos,lo doblamos y colocamos al lado de nuestros hilos de esta manera,dejando aproximadamente 2 centímetros y ajustamos con nuestra pinza.

Paso 2
Comenzamos el proceso de tejido de la siguiente manera
Tomaremos el primer hilo azul y haremos un nudo hacia la derecha y luego repetiremos con otro nudo por los 2 extremos de nuestro hilo grueso

seguiremos con nuestro segundo hilo azul y haremos el mismo procedimiento que el anterior haciendo 2 nudos de la misma manera

Paso 3

Tomaremos el siguiente hilo rojo y haremos 2 nudos,pasando primero por el hilo grueso y luego por el otro,haremos el mismos procedimiento hasta pasar los hilos rojos por el hilo grueso hacia la derecha

Luego pasamos nuestros hilos blancos de la misma manera que los anteriores con 2 nudos iremos dándole textura a nuestra pulsera.

Paso 4

Luego de haber pasado todos los nudos hacia la derecha,lo que haremos sera de izquierda a derecha tomemos el hilo blanco y haremos un nudo simple pero esta vez de derecha a izquierda

seguimos el proceso hasta pasar los 2 hilos blanco para el lado izquierdo

Paso 5

Iremos haciendo estos sencillos nudos,recuerden 1 primero y luego el otro,Tomando el hilo rojo pasamos con un nudo por el hilo del medio,luego de haber pasado el segundo hilo rojo seguiremos la secuencia hasta pasar al siguiente hilo que es el azul,y hacemos los 2 nudos y estaremos listos para seguir la misma operación hasta obtener obtener el largo que queremos,lo recomendable es 15cm aproximadamente de largo..les repito este proceso es muy fácil de realizar.

Alli se puede ver el avance de la pulsera tejida.

Paso 6

Ya por último lo que haremos es retirar los hilos de la pinza y cortaremos con nuestra Tijera el resto de los hilos sellamos con en yesquero y ya tenemos nuestra pulsera tejida al estilo macrame.

Espero que les haya gustado el paso a paso,muchas gracias por su atención,que Dios los bendiga,les deseo muchos éxitos y bendiciones.

EXITOS

Creditos

  • Las fotos son de mi autoria y fueron tomadas por mi teléfono Samsung A01

  • Traductor utilizado Deelp traductor

  • Las fotos las edite mediante la aplicación editor de fotos polish.


English

Hello my beautiful hive community and my dear friends of jewerly is a pleasure to greet you again,grateful to God mainly for giving me the opportunity to be with you again,and with all those wonderful people who have provided that support in each publication I do.
Today I want to show you a beautiful bracelet in macrame weaving,this bracelet I have made it with recycled threads,it is wonderful how those things that we think are useless become art when in fact we can use them to make works of art,remember before getting rid of any material think about recycling them and create beautiful things like these.

The materials used for this bracelet were as follows:.

💫160CM OF RED THREAD.
💫160CM OF BLUE THREAD.
💫160CM OF WHITE THREAD.
💫80CM OF THICK ORANGE THREAD.
💫1 SADDLE
💫1 YESQUERO
💫1 BOARD WITH CLAMP

It should be noted that the threads that you are going to use can be of the color that you like, I used these colors so that the work could be seen, but the more colorful the better it will be.

The steps used for this bracelet are as follows:

Step 1
The first thing we will do is cut the 160cm threads in half and classify them according to their color, then we make a knot and place them on the table with pliers and adjust it.

The next step is to place our orange thread the thickest of all,we fold it and place it next to our threads in this way,leaving approximately 2 centimeters and adjust it with our tweezers.

Step 2
We start the weaving process as follows
We will take the first blue thread and make a knot to the right and then repeat with another knot through the 2 ends of our thick thread.

we will continue with our second blue thread and we will do the same procedure as the previous one making 2 knots in the same way.

Step 3

We will take the next red yarn and we will make 2 knots, passing first through the thick yarn and then through the other one, we will do the same procedure until we pass the red yarns through the thick yarn to the right.

Then we pass our white threads in the same way as the previous ones with 2 knots we will give texture to our bracelet.

Step 4

After passing all the knots to the right, what we will do is from left to right, we will take the white thread and we will make a simple knot but this time from right to left.

we continue the process until we pass the 2 white threads to the left side.

Step 5

We will be making these simple knots, remember 1 first and then the other, taking the red thread we pass with a knot by the thread of the middle, after having passed the second red thread we will follow the sequence until passing to the following thread that is the blue one, and we make the 2 knots and we will be ready to follow the same operation until obtaining the length that we want, the advisable thing is 15cm approximately of length..I repeat this process is very easy to make.

Here you can see the progress of the woven bracelet.

Step 6

And finally what we will do is remove the threads of the clamp and cut with our scissors the rest of the threads sealed with tinder and we have our bracelet woven macrame style.

I hope you liked the step by step, thank you very much for your attention, God bless you, I wish you many successes and blessings.

SUCCESSES

Credits

  • The photos are my own and were taken by my Samsung A01 phone.

  • Translator used Deelp translator

  • The photos were edited using the polish photo editor application.



0
0
0.000
2 comments
avatar

Congratulations @afrofat1! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You received more than 100 HP as payout for your posts, comments and curation.
Your next payout target is 250 HP.
The unit is Hive Power equivalent because post and comment rewards can be split into HP and HBD

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

To support your work, I also upvoted your post!

Check out our last posts:

Feedback from the March Hive Power Up Day
Hive Power Up Month Challenge - February 2023 Winners List
Be ready for the March edition of the Hive Power Up Month!
The Hive Gamification Proposal
Support the HiveBuzz project. Vote for our proposal!
0
0
0.000
avatar

Excelente amigo te quedo muy bien los paso a paso

0
0
0.000