Making a Fabric Tulip | Tutorial | [Eng - Esp]
English
Hi there, friends of the DIYHub community; it's my first post in this nice community! How are you today? I hope you are doing great!
I'm sure you've seen many tutorials for making flower crafts, like paper roses, fabric roses, and paper tulips. But have you seen fabric tulips? Well, I hope you haven't seen them, because in this post I will show you how to make them, and look how cute they look.
This is a tutorial with lots of love, as my first post for this beautiful community of crafters. Here we go!
Materials
Rectangle of fabric 13x7 cm.
Fabric rectangle 15x8 cm.
Bamboo skewer.
Silicone gun.
Scissors.
Thread and needle.
![]() | ![]() |
---|
We take our 13×7 cm rectangle, and we will turn the fabric inside out, and we will start by making a hem on each edge (the edges measuring 13 cm).
![]() | ![]() |
---|
Now, once the hem is ready, as you can see in the first image, we are going to turn the fabric inside out again (so that the hems are facing inwards), and we are going to make a seam that joins the two unhemmed ends.
![]() | ![]() |
---|
The next step is to make a baste stitch along one edge of the rectangle.
Once the baste seam is ready, without cutting the thread and needle, we are going to put a height stick through the hole of the rectangle, as shown in the image. This will leave a distance of approx. between the edge of the fabric and the tip of the height stick. And pull the thread so that it gathers the fabric around the height stick.
The next thing I did was to apply a little hot silicone in the area where the fabric met the height stick so that it would be well secured and the fabric would not come off.
The next thing we will do is turn the fabric upwards so that we have a kind of little cup, hehe. We are going to fill this little cup with foam or cotton stuffing, whatever you prefer. Try to fill it well so that the tulips are plump; I didn't fill it that much, and later I regretted it. The fatter they are, the more cute the tulips will be, hehehe.
Now we will make a stitch right in the center of the edge, joining both edges, flattening them, and leaving two openings.
![]() | ![]() |
---|
Then we take one of the openings of this edge and flatten it towards the center, making another stitch to join it to the center. We repeat this process with the other opening. And you can see it looks like a tulip, but I wanted to add a few personal touches that will make it more beautiful. Read on.
We take the pearl and sew it right in the center. I was sad that the thread was very noticeable, but I didn't have white thread or something that looked more aesthetic. But it doesn't matter; the pearlite makes our tulip beautiful just the same.
The next thing I wanted to make was a very pretty leaf for the tulip, since I feel like the stem plain doesn't look anything special. By the way, I would have liked to line or paint the stem green, but I didn't have any paint. But it doesn't matter; I don't think it looks bad if we just use the wooden stick. I think the important thing is to do what we like with what we have. As long as we find it nice, that's what matters. Remember that, hehe.
![]() | ![]() |
---|
Now we take our 15×8 cm rectangle, and we are going to fold it in half, so that we are now left with a 15×4 cm rectangle. Then we sew so that these two ends are joined together.
![]() | ![]() |
---|
Turn the fabric inside out so that the seam we made to join the two ends is on the inside. I made a small hem at each end so that the edges would not be so rough.
Now we are going to baste right along the edge of the fabric, across the entire width. We based the whole thing without cutting the thread.
And we pull the thread to pucker the fabric — how pretty it looks!
Next, I folded it in half again and tucked the height stick between the two ends. Then I added hot silicone to glue the fabric to the height stick.
![]() | ![]() |
---|
And that would be it.
The main reason I made this fabric tulip was to put my needles in it, so I wouldn't lose them. It's a very cute solution so that my needles don't get lost.
But besides serving to stick needles in them, it would also be a beautiful gift for someone because it is a bouquet of tulips that would never wither. Plus, you can make it in any color you want, even patterns like the one I made, and they will last forever.
Hope you liked my post!
Without anything else to add… Take care, drink water, and don't forget to smile. Love you! See you in the next post, bye!
Español
Holiii, amigos de la comunidad de DIYHub, ¡es mi primera publicación en esta linda comunidad! ¿Cómo se encuentran el día de hoy?, ¡Espero que muy bien!
Seguro has visto muchos tutoriales para hacer manualidades de flores, como rosas de papel, rosas de tela, tulipanes de papel… ¿Pero has visto tulipanes de tela? Pues espero que no los hayas visto, porque en este post los enseñaré a hacerlos, y mira que quedan muy tiernos.
Este es un tutorial con mucho amor, como mi primer post para esta bella comunidad de artesanos. ¡Vamos allá!
Materiales
Rectángulo de tela de 13x7 cm.
Rectángulo de tela de 15x8 cm.
Palito de altura.
Pistola de silicon.
Tijeras.
Hilo y aguja.
![]() | ![]() |
---|
Tomamos nuestro rectángulo de 13x7 cm y vamos a poner la tela al revés, y comenzaremos por hacer un dobladillo en cada borde (los bordes que miden 13 cm).
![]() | ![]() |
---|
Ahora, una vez listo el dobladillo, como pueden ver en la primera imagen, vamos a poner la tela al revés nuevamente (de manera que los dobladillos queden hacia dentro) y vamos a hacer una costura que una los dos extremos que no tenían dobladillo.
![]() | ![]() |
---|
Lo siguiente es hacer una costura basteada que recorra todo un borde del rectángulo que tenemos.
Una vez lista la costura basteada, sin cortar el hilo y la aguja, vamos a meter un palito de altura por el hueco del rectángulo, tal como se ve en la imagen, dejando una distancia de aprox. entre el borde de la tela y la punta del palito de altura. Y jalamos el hilo para que ese frunza la tela alrededor del palito de altura.
Lo siguiente que hice fue aplicar un poco de silicona caliente en la zona donde se juntaba la tela con el palito de altura, para que quedara bien asegurado y no se saliera la tela.
Lo siguiente que haremos es voltear la tela hacia arriba, de modo que nos quede una especie de vasito, jijiji. Este vasito lo vamos a rellenar con relleno de espuma o algodón, lo que ustedes prefieran. Procuren que quede bien llenito para que queden tulipanes gorditos, yo no lo llené tanto y después me arrepentí. Mientras más gorditos, más tiernos los tulipanes, jijiji.
Ahora haremos un punto de costura justo en el centro del borde, uniendo ambos bordes, aplastándolos, dejando dos aberturas.
![]() | ![]() |
---|
Luego tomamos una de las aberturas de este borde, y la aplastamos hacia el centro, haciendo otro punto de costura para unirla con el centro. Repetimos este proceso con la otra abertura. Y ya se dan cuenta de que parece un tulipán, pero quería añadir unos toques personales que lo harán más bello. Sigan leyendo.
Tomamos la perla y la coseremos justo en el centro. Me puso triste que se notaba mucho el hilo, pero es que no tenía hilo blanco o algo que se viera más estético. Pero no importa, la perlita hace hermoso a nuestro tulipán de igual manera.
Lo siguiente que quise hacer fue una hoja muy bonita para el tulipán, ya que siento que el tallo a secas no se ve nada especial. Por cierto, me hubiese gustado forrar o pintar el tallo de verde, pero no tenía pintura. Pero no importa, tampoco considero que se vea mal si usamos únicamente el palito de madera. Creo que lo importante es hacer lo que nos gusta con lo que tenemos. Siempre y cuando nosotros lo encontremos agradable, es lo que importa. Recuerden eso, jiji.
![]() | ![]() |
---|
Ahora tomamos nuestro rectángulo de 15x8 cm y lo vamos a doblar a la mitad, de manera que nos quede ahora un rectángulo de 15x4 cm. Luego cosemos de manera que se junten estos dos extremos que quedan juntos.
![]() | ![]() |
---|
Volteamos la tela, de manera que la costura que hicimos para juntar los dos extremos quede por dentro. Hice un pequeño dobladillo por cada extremo, para que no quedaran los bordes tan toscos.
Ahora vamos a bastear justamente por el borde de la tela, por todo lo ancho. Basteamos todo sin cortar el hilo.
Y jalamos el hilo para que se frunza la tela. ¡Qué bonito se ve!
Lo siguiente fue doblarlo por la mitad nuevamente y meter el palito de altura entre los dos extremos. Luego añadí silicona caliente para pegar la tela al palito de altura.
![]() | ![]() |
---|
Y ya estaría.
El motivo principal por el que hice este tulipán de tela, fue para poner mis agujas y que no se me perdieran. Es una solución muy tierna para que no se pierdan mis agujas.
Pero además de servir para clavarles agujas, también sería un hermoso regalo para alguien, pues es un ramo de tulipanes que nunca se marchitaría, además de que puedes hacerlo del color que quieras, incluso de patrones como el que yo hice, y durarán para siempre.
¡Espero que te haya gustado mi post!
Sin nada más que añadir… Cuídense, tomen agua, y no se olviden de sonreír. ¡Se les quiere! Nos vemos en el próximo post, ¡chau!
Credits | Créditos
- English translation DeepL (sorry for any mistakes, English is my second language)
- Traducción al inglés DeepL (lo siento por cualquier error, el inglés es mi segundo idioma.)
- Cover, and banners made in Canva
- Portada y banners hechos en Canva
- Photos used in the post were taken by me, using a Samsung Galaxy J6
- Las fotos usadas en el post fueron tomadas por mí, usando un Samsung Galaxy J6
The fabric tulip came out so well. The stitching is clean. Great job.
selected by @stevenson7
Thank you very much for your support!
Your first post here is so amazing
Your efforts is inspiring
It's great to have you share this with us.
Thank you.
Glad to hear it, thanks so much for stopping by my blog!
latest version of tulip, i like the result. beautiful and neat.
Thanks for stopping by my blog! 💜
Yes, you're welcome. Keep up the spirit in creating the most beautiful works.
¡Enhorabuena!
✅ Has hecho un buen trabajo, por lo cual tu publicación ha sido valorada y ha recibido el apoyo de parte de CHESS BROTHERS ♔ 💪
♟ Te invitamos a usar nuestra etiqueta #chessbrothers y a que aprendas más sobre nosotros.
♟♟ También puedes contactarnos en nuestro servidor de Discord y promocionar allí tus publicaciones.
♟♟♟ Considera unirte a nuestro trail de curación para que trabajemos en equipo y recibas recompensas automáticamente.
♞♟ Echa un vistazo a nuestra cuenta @chessbrotherspro para que te informes sobre el proceso de curación llevado a diario por nuestro equipo.
🥇 Si quieres obtener ganancias con tu delegacion de HP y apoyar a nuestro proyecto, te invitamos a unirte al plan Master Investor. Aquí puedes aprender cómo hacerlo.
Cordialmente
El equipo de CHESS BROTHERS
Muchas gracias por el apoyo!💙
Me alegra mucho verte por esta comunidad querida💖 y no, nunca había visto un tulipán en este estilo y me encantó, se ve todo aesthetic y bonito y además es funcional🌷 excelente post✨