DECORATED AND PERSONALIZED BRACELET. [ESP-ENG]

avatar

Polish_20230307_172356656.jpg

Hola amigos conocedores de este bello arte de la bisutería. Siempre que paso por aquí a leer sus publicaciones me siento motivada, todo lo veo hermoso. Hay un abanico grande de diseños para recrear en el momento que lo necesitemos, eso me gusta mucho porque todos están muy bien explicados. Muchas gracias por seguir creando para compartir.

Bienvenidos a mi blog.

El día de hoy les traigo un modelo de pulsera que acabo de realizar. Estuve organizando mi escaparate y encontré varias pulseras de metal que son muy lindas, ellas traen un diseño grabado en la parte de afuera, son planas y delgadas. Como ya están viejitas me provocó hacerles un arreglo para darle más vida y color. Se la ofrecí a mi vecinita que estaba aquí observándome mientras la hacía. Ella tendrá una nueva prenda para lucir y combinar con su ropa. Le agregué las iniciales de su nombre para personalizarla.

PULSERA DECORADA Y PERSONALIZADA.

Para realizar este modelo de pulsera vamos a necesitar algunos materiales que podrías tener en casa:

Materiales.

  • Aro de metal, plano y delgado.
  • Dos letras de acrílico.
  • Alambre de cobre N°28
  • Pinzas de corte.
  • Piedras de Swarovski de variados colores. Tamaño de tu preferencia.
  • Mostacillas pequeñas. 300 aproximadamente.

Polish_20230307_171152576.jpg

Procedimiento.

  • Debemos tomar las medidas de la pulsera para tener idea del espacio y así calcular la cantidad de alambre y de piedras. De una vez ordenamos las piedras de Swarovski y las letras según el diseño que más nos guste.

Polish_20230307_171213176.jpg

  • Para armar el diseño empezamos cortando 2.5 metros de alambre. Lo vamos a asegurar desde una punta a la pulsera. Hacemos dos o tres vueltas con esa punta por dentro y por fuera de la pulsera o aro de metal. Luego pasamos las primeras mostacillas, el número puede variar. Yo coloqué 12 ó 15 porque las mostacillas tienen diferentes tamaños y son irregulares. Después de pasar estás mostacillas colocamos el primer Swarovski. Este proceso se repite, debemos sostener con fuerza lo ya realizado para evitar que quede flojo o se nos desate.

Polish_20230307_171250928.jpg


Polish_20230307_171323776.jpg

  • Entonces lo que vamos haciendo son dos vueltas de 15 mostacillas y luego metemos un Swarovski. Así seguimos hasta poner la primera letra.

Polish_20230307_171351824.jpg

  • Entre letra y letra también ponemos mostacillas y un Swarovski. Después de colocar las dos letras seguimos con el diseño de mostacillas y Swarovski. Al finalizar completamos el espacio restante solo con mostacillas.

Polish_20230307_171457032.jpg

Se ve bastante bien, además el Swarovski brilla y la hace lucir mucho más linda. De esta manera he podido darle más color y alegría a esta pulsera. Mi vecina aún no sabe que se la regalaré, será una sorpresa. Sé que le quedará porque estando aquí se las midió 😊 mientras conversábamos. Ella es una señorita muy linda, además coqueta.

Polish_20230307_171608253.jpg

Estoy contenta por hacer este trabajo. Transformar prendas es muy entretenido. Siempre lo disfruto. Espero que les guste este diseño. Muchísimas gracias por la atención brindada. Todas las fotos son de mi propiedad. Edité con Polish. Usé el traductor de Deelp. Será hasta la próxima. Bendiciones.


English.

Polish_20230307_172356656.jpg

Hello friends connoisseurs of this beautiful art of costume jewelry. Whenever I stop by here to read your posts I feel motivated, everything looks beautiful. There is a wide range of designs to recreate at the time we need it, I like it very much because they are all very well explained. Thank you very much for continuing to create to share.

Welcome to my blog.

Today I bring you a bracelet model that I just made. I was organizing my showcase and I found several metal bracelets that are very nice, they bring a design engraved on the outside, they are flat and thin. As they are already old, I decided to fix them to give them more life and color. I offered them to my neighbor who was here watching me while I made them. She will have a new garment to show off and match her clothes. I added the initials of her name to personalize it.

DECORATED AND PERSONALIZED BRACELET.

To make this bracelet model we are going to need some materials that you might have at home:

Materials.

  • Metal ring, flat and thin.
  • Two acrylic letters.
  • Copper wire N°28
  • Cutting tweezers.
  • Swarovski stones of various colors. Size of your choice.
  • Small beads. Approximately 300.

Polish_20230307_171152576.jpg

Procedure.

  • We must take the measurements of the bracelet to have an idea of the space and thus calculate the amount of wire and stones. At once we order the Swarovski stones and the letters according to the design we like the most.

Polish_20230307_171213176.jpg

  • To assemble the design we start by cutting 2.5 meters of wire. We are going to secure it from one end to the bracelet. We make two or three turns with that tip inside and outside the bracelet or metal ring. Then we pass the first beads, the number can vary. I put 12 or 15 because the beads have different sizes and are irregular. After passing these beads we place the first Swarovski. This process is repeated, we must hold tightly what has already been done to prevent it from becoming loose or untied.

Polish_20230307_171250928.jpg


Polish_20230307_171323776.jpg

  • So what we are doing is two rounds of 15 beads and then we put in a Swarovski. This way we continue until we put the first letter.

Polish_20230307_171351824.jpg

  • Between each letter we also put beads and a Swarovski. After placing the two letters we continue with the beads and Swarovski design. At the end we complete the remaining space only with beads.

Polish_20230307_171457032.jpg

It looks pretty good, plus the Swarovski sparkles and makes it look much nicer. This way I was able to give more color and joy to this bracelet. My neighbor doesn't know yet that I will give it to her, it will be a surprise. I know it will fit her because when she was here she measured them 😊 while we were talking. She is a very pretty lady, she is also a flirt.

Polish_20230307_171608253.jpg

I am happy to do this job. Transforming garments is a lot of fun. I always enjoy it. I hope you like this design. Thank you very much for your attention. All photos are my property. I edited with Polish. I used Deelp translator. See you next time. Blessings.



0
0
0.000
12 comments
avatar

I so like bracelets that are made from beads ever since I was a kid. So it's good to see a DIY how-to-make one.😊

0
0
0.000
avatar

Hi. I am very glad that you find this tutorial useful. The beaded bracelets are very cute.

0
0
0.000
avatar

Muy linda pulsera amiga @creacioneslelys estas letras están muy de moda, es bueno ver el resultado de esta decoración tan bonita y así darle vida a unas pulseras que estaban guardadas, me alegra que se la regalaras a tu vecina. Saludos

0
0
0.000
avatar

Hola. Así es. Ya la estrenó. Se puso muy contenta cuando vio que tenía sus iniciales. Muchas gracias por tu visita 😌😌😌

0
0
0.000
avatar

Te quedó muy linda y creativa. Me gustan mucho los colores. Las cuentas con letras que utilizaste me encantan y hace mucho que estoy buscando y no me creerás que no he conseguido.
Buen trabajo amiga.

0
0
0.000
avatar

Hola. Me alegra que te guste. A mí me encantó hacerla. Las letras se agotan por aquí también. Solo se ven con frecuencia las que son cuadradas.

Espero que puedas conseguir pronto para que nos muestres tus bellas creaciones.

0
0
0.000