Diy owl using clay 😃

Hello,Hi , namaste to all hive users reaching this post ,hope doing great 😃. Here I am again with an clay art , actually I am enjoying making things with it cuzz its fun . As time is passing I am improving my patience level due to some of my art work. Tough I am not that good at art but I do enjoy while making them , I used to had no patience and wanted to make drawings and art works as fast as I could but as time is being passed ,a little change is visible in my patience level ,which I think is a great thing. So today I made an owl using clay.

Art teachers you many things in your life .
So without any further redo let me share you the whole process of making it.
I took clay which includes hardener and resin base and then mixed it properly.

Make it round and flat it afterwards ,do apply talcum powder in the base so that it won't stick in the surface.

After this I made a outline of the owl Using a pen , roughly.

Then I cutted it with the help of knife properly.

After this I rolled thin strings and set it in the corners and the wings part.

Then made the eyes and noes ,then pasted it with the help of water ,you can use glue too.

Let it dry for atlest 1 hour or more than it.
After this coat it with white colour.

After this I started making the pattern as followed

After this started with the eyes.

Then I started making design in the wings.

After this I made outline in it .
And here it was completed.

Here we learned one more thing that
"As time passed everything gets perfect and much better 😀"
Thank you and take care 😊