Beautiful eva gum tendrils using the mermaid tail technique [ESP|ENG]

avatar

Un saludo mi querida comunidad @Jewelry feliz día 💙 ya se aproxima la temporada de crear y elaborar los accesorios coloridos y con mucho brillo tipo fantasía, muy llamativos para lucir en estos carnavales y como me gusta aprovechar al máximo los materiales que tengo en casa, me encanto mucho una técnica donde podía utilizar todos los retazo de Goma Eva escarchada y con una perforadora abre huecos, me tome un pequeño tiempo y comencé sacar una cantidad de pequeños círculos de diferentes colores que necesito para elaborar una hermosa técnica que les voy a compartir, una manera bien sencilla de realizar unos zarcillos con forma de gota de agua en la que vamos a simular la técnica cola de sirena, se llama así porque se simula la escama de este ser imaginario que es mitad humano y mitad pez que vive en el fondo del mar y del cual se han inspirado para realizar películas y famosos dibujos animados y su cola es muy hermosa. Solo necesitas tener recorticos de Goma Eva de varios colores que sean de tu agrado para combinar. Ahora materiales en manos que comenzamos con nuestro paso a paso

Greetings my dear community @Jewelry happy day 💙 the season is approaching to create and elaborate colorful accessories and with lots of brightness fantasy type, very striking to wear in these carnivals and as I like to make the most of the materials I have at home, I love a lot a technique where I could use all the scraps of frosted Goma Eva and with a hole puncher opens holes, I took a little time and began to take a lot of small circles of different colors that I need to develop a beautiful technique that I will share a very simple way to make some tendrils shaped like a drop of water in which we will simulate the mermaid tail technique, it is called so because it simulates the scale of this imaginary being that is half human and half fish that lives at the bottom of the sea and which have been inspired to make movies and famous cartoons and its tail is very beautiful. You just need to have some Goma Eva cutouts of various colors that you like to combine. Now materials in hands that we begin with our step by step

  • Goma Eva Blanca
  • Silicona Liquida
  • Tijera
  • Círculos de Goma Eva escarchada
  • Anzuelos para Zarcillos
  • Tijera
  • White Eva Rubber
  • Liquid Silicone
  • Scissors
  • Frosted EVA rubber circles
  • Hooks for tendrils
  • Scissors

Iniciamos nuestro proyecto que en realidad es tan fácil que no tiene muchas cosas que explicar, comenzamos elaborando la forma de los zarcillos que como les comente es similar a una gota de agua el tamaño se los dejo a su gusto. Primero creamos el diseño o molde en un papel, luego los marcamos en la Goma Eva y por ultimo recortamos, lo que si les puedo e dar un dato cuando recorten este tipo de material no hacerlo con la punta de la tijera porque le da un mal acabado a la pieza y esto es una de las cosas mas importante al trabajar con Goma Eva

We started our project which is actually so easy that it does not have many things to explain, we began by making the shape of the tendrils that as I said is similar to a drop of water, the size is left to your taste. First we create the design or mold on paper, then we mark them on the Eva Rubber and finally we cut, what I can give you is a tip when cutting this type of material not to do it with the tip of the scissors because it gives a bad finish to the piece and this is one of the most important things when working with Eva Rubber.


Ahora de acuerdo a los colores de los recortes que tengamos en casa o queramos hacer la combinación, sacamos la mayor cantidad de círculos en Goma Eva escarchada con la ayuda de un perforador abre huecos

Now, according to the colors of the cut-outs we have at home or we want to make the combination, we take out as many circles in frosted Goma Eva with the help of a hole puncher.

Luego tomamos muestra base del zarcillo que realice en Goma Eva color blanco escarchado y vamos a comenzar desde la parte de arriba o superior y hacemos una secuencia de colores en este caso utilice los siguientes colores azul, fucsia, dorado, plateado, verde oscuro y claro, negro. Ustedes escogen los que mas le gusten todo es cuestión de la combinación que quieran

Then we take a sample of the base of the tendril that I made in white frosted Goma Eva and we will start from the top and make a sequence of colors in this case use the following colors: blue, fuchsia, gold, silver, dark and light green, black. You choose the ones you like the most, it is all a matter of the combination you want.

Como les dije anteriormente comenzamos desde la parte superior que es la punta de la gota y vamos a ir pegando los círculos con silicona liquida sobre poniendo los círculos en cada fila que se note el detalle que la punta del uno esta encima del otro igual como observamos las escamas de los peces, esto lo repetimos hasta cubrir por completo o forrar toda la base de igual manera ya teniendo uno listo repetimos la misma secuencia con el otro zarcillo

As I said before we start from the top which is the tip of the drop and we will go gluing the circles with liquid silicone on putting the circles in each row to note the detail that the tip of one is above the other as we see the scales of the fish, we repeat this until completely cover or cover the entire base in the same way and having one ready we repeat the same sequence with the other tendril.


Para terminar le colocamos los anzuelos a los zarcillos, para esto me voy ayudar con una aguja lanera para perforar en la parte superior donde vamos ubicar los anzuelos, abrimos el aro del anzuelo lo hacemos pasar por el pequeño orificio y ajustamos con las pinzas. Esto lo hacemos en ambos zarcillos

To finish we place the hooks to the tendrils, for this I am going to help me with a wool needle to perforate in the superior part where we are going to locate the hooks, we open the ring of the hook we make it pass through the small hole and we adjust with the tweezers. We do this in both tendrils


Ahora si Listo!!! ya culminamos con este hermoso proyecto colorido y con mucho brillo que les compartí con mucho cariño hoy como es la elaboración de unos zarcillos utilizando pequeños retazo de goma eva para realizar la técnica cola de sirena, esperando que sea de su agrado. Con esmero y dedicación podemos lograr muchas cosas que nos proponemos!! Un saludo y nos vemos en una próxima oportunidad!!

Now if Ready!!! we have finished with this beautiful colorful and bright project that I shared with much affection today as is the development of a few tendrils using small pieces of Goma Eva to make the mermaid tail technique, hoping it is to your liking. With care and dedication we can achieve many things we set out to do! Greetings and see you in the next opportunity!


Pueden seguirme en 💙:You can follow me on 💙:
Twittereveyese1312
Discordeveyese1312#6211

Las fotos y el contenido son de mi autoria

Imágenes editadas en PowerPoint Canva y PicMonkey

Para la traducción usé el traductor: DeepL


The photos and content are my own.

Images edited in PowerPoint Canva and PicMonkey

For the translation, I used the translator: DeepL




0
0
0.000
7 comments
avatar

Muy creativa y colorida manualidad, nos encantan ver este arcoiris de colores, los zarcillos quedaron hermosos 💜 y el diseño está genial, gran trabajo 🎊

0
0
0.000
avatar

Hola mi querida comunidad @hive-189504 me alegra que les haya gustado 😊 mi proyecto de hoy, si estos zarcillos tienen un destello de colores muy hermosos y la técnica similar a las escamas de una cola de sirena. Gracias por contar siempre con su apoyo. Bendiciones y exito

0
0
0.000
avatar

Te quedaron muy lindos @eveyese1312. Un diseño inusual, bastante creativo, llamativo y colorido. Me gustaron mucho y te lucen hermosos. Felicidades. Que tengas un hermoso fin de semana. Éxitos... ✨

0
0
0.000
avatar

Hola @dayadam si me encantó el resultado de este proyecto y además su elaboración es muy fácil, pero quedan geniales. Me alegra que te hayan gustado y tambien por visitar y dejar tu comentario 🙂 Saludos y muchas bendiciones

0
0
0.000
avatar
Thank you for sharing this post on HIVE!

Your content got selected by our fellow curator sharminmim & you just received a little thank you upvote from us for your great work! Your post will be featured in one of our recurring compilations which are aiming to offer you a stage to widen your audience within the DIY scene of Hive. Stay creative & HIVE ON!


Please vote for our hive witness <3

0
0
0.000
avatar

Felicidades!!! Están demasiado hermosos y coloridos

0
0
0.000
avatar

Hola @larka me encanta saber que te gustó mi proyecto, como les dije quería algo bien colorido y además brillante y también te puedo decir que son súper fácil, lo primero que debes hacer es ir realizando con una perforadora abre huecos los círculos esa es la parte más laboriosa. Gracias por visitar y dejar tu comentario. Muchas. Bendiciones 🙂

0
0
0.000