Pijama de dama con pantalón largo [ESP - ENG]
Hola a todos mis queridos amigos de Hive, feliz lunes y feliz inicio de semana para todos.
Hoy en lunes de agujas quiero enseñarles el paso a paso de como elaborar una linda pijama de dama sin usar moldes, es decir, para ello vamos a clonar prendas.
- Tela en algodón 1 metro (con ancho de 1 ½)
- Alfileres.
- Cinta métrica.
- Hilo.
- Tijera.
- Una pijama para sacar el molde y hacer una nueva
Para comenzar vamos a colocar la tela al doblez para que podamos clonar la prenda, comentamos con la parte delantera a la izquierda y la trasera o posterior a la derecha como se ve en la foto, para que no tenga costura a los lados.
Cortamos y continuamos cosiendo los delanteros y traseros, para comenzar con la parte inferior, abrimos y acomodamos la forma del pantalón, de manera que debamos pasar costura en la entrepierna, esto lo hacemos con costura recta, zig zag u overlock.
Luego tomamos la medida de nuestro cuerpo de la cintura con el caucho u elástico, dejamos un centímetro para empezar a coser el caucho a la cintura y cerramos.
Para terminar con esta pieza, se le cose la bota de cada pierna, haciendo un doble dobladillo y listo el pantalón, esta técnica es una de las más rápidas para hacer pantalones o short básicos.
Con un modelo de blusa que tengamos disponible vamos a hacer el clon y para ello se coloca en la tela y se traza el delantero y trasero o posterior y también el tipo de manga.
Sacamos las piezas y estas son las que nos deben de quedar.
Ya cortada cierro la parte de los hombros.
Aparte a la manga que es un semicírculo se le pasa costura tipo rollito y esto puede ser con el pie de rollito o en mi caso coloco mi máquina en modo ojal con zig zag y uno de ancho de costura. Luego se cose estirando la tela y se hace el modo rollito .
Este mismo procedimiento lo hice en las dos mangas y en el la cintura de la blusa.
Luego se corta una tira de 6 centímetros de ancho y se dobla a la mitad de manera que quede de 3 centímetros para el contorno de cuello, se hace cosiendo de revés a derecho con una medida más o menos de 3 centímetros menos que la medida del contorno de cuello.
Ya con esto tendremos esta bella pijama de dama hecha a partir de prendas clonadas. Aparte de lo linda que queda, debo decir que la tela es 10/10 la conseguí en el castillo de las telas aquí en San Cristóbal, cómo tela para pijama y es de algodón elástico que es suave, fresca y con estampados muy bonitos. Hasta aquí mi publicación del día de hoy, gracias por llegar hasta aquí, les deseo que tengan un buen día y noche.
Hello to all my dear friends of Hive, happy Monday and happy start of the week for everyone.
Today on Needle Monday I want to show you step by step how to make a nice lady pajamas without using patterns, that is, for this we are going to clone garments.
- Cotton fabric 1 meter (1 ½" wide).
- Pins.
- Tape measure.
- Thread.
- Scissors.
- Pajamas to take out the mold and make a new one.
To begin, we are going to place the fabric to the fold so that we can clone the garment, we comment with the front part on the left and the back or posterior part on the right as shown in the photo, so that it does not have a seam on the sides.
We cut and continue sewing the front and back, to start with the lower part, we open and accommodate the shape of the pants, so that we must pass seam in the crotch, we do this with straight seam, zig zag or overlock.
Then we take the measurement of our body of the waist with the rubber or elastic, we leave a centimeter to start sewing the rubber to the waist and close.
To finish with this piece, we sew the boot of each leg, making a double hem and the pants are ready, this technique is one of the fastest to make basic pants or shorts.
With a blouse model that we have available we are going to make the clone and for this we place it on the fabric and trace the front and back or back and also the type of sleeve.
We take out the pieces and these are the ones that we should be left with
Once cut, I close the shoulder part.
Besides the sleeve which is a semicircle, I sew a roll seam and this can be done with the roll foot or in my case I put my machine in buttonhole mode with zig zag and one wide seam. Then you sew stretching the fabric and make the roll mode.
I did the same procedure on the two sleeves and the waistband of the blouse.
Then cut a strip of 6 centimeters wide and fold it in half so that it is 3 centimeters wide for the neck contour, sewing from back to front with a measurement of about 3 centimeters less than the measurement of the neck contour.
With this we have this beautiful lady's pajamas made from cloned garments. Besides how cute it looks, I must say that the fabric is 10/10, I got it at the fabric castle here in San Cristobal, as pajama fabric and it is made of elastic cotton which is soft, fresh and with very nice prints. So far my publication of today, thank you for coming this far, I wish you have a good day and night.
Fotos tomadas de mi teléfono Xiaomi Redmi Note 6 Pro y mi teléfono Samsung J4 plus|| Photos taken from my Xiaomi Redmi Note 6 Pro phone and my Samsung J4 plus phone.
Fuente del editor de imágenes || Image editor source
wow quedo hermoso y se ve super cómodo y fresco, te felicito feliz noche
Hola linda 👋 sii de verdad que es una tela bastante fresca. Gracias por tu comentario, saludos.
saludos
La tela se ve fresca, ideal para este verano. ¡Gran trabajo!.
Me gusta mucho esta idea de clonar prendas, creo que es una técnica muy util para principiantes.
Te quedó muy bonito este proyecto. Saludos 🤗
Hola Katty 👋 si, es una técnica que siempre me ha funcionado. Gracias por pasarte por aquí, saludos.