A cool cat house

Hello friends, today I will show you how I made a house for a stray cat, it is an old cat that has no owner and nobody wants it anymore, it has spent a lot of time on the sidewalk of the house.

Since it is a stray cat, it spends its time in different places, and in one of them is a garage, where I am going to put the house, so that it can take shelter, especially when it is raining.

Initially I looked for several models on the internet, that served as an example to make a sketch that would help me with the material I had, which is basically recycled material, I took some measurements of the cat as a reference and increased a few more centimeters.

The whole house is made of recycled wood that was given to me in a carpentry shop, they are slats of different types of wood; I made the walls from a cardboard that they also gave me and that was from a team's packaging and is quite thick and resistant.

Initially I made the base, I assembled it with slats forming 90 degree angles to resist, for this I used small nails and white carpenter's rubber; You have to be patient since the wood must be cut to the extent that it is needed.

Despite the fact that the wooden slats are thin, with the nails and the rubber, the structure is gaining resistance, help me to assemble it with dams and fasteners, allowing it to dry to continue the work later.

The whole house has a base of 50 centimeters long by 50 centimeters wide, in the front part we have a door in the shape of a cat, it has its roof and a gazebo if you want to climb there.

Once the main structure is assembled, the walls are lined with cardboard, thin wooden slats are placed to serve as a stop and not go past the walls, it is cut to size, and to give it greater support, place slats in the middle to that does not bend All the walls on the outside I painted them with a white paint, from a paint that had been left over; the exposed wooden slats were covered with a resin made from polystyrene with some solvent, thus protecting it from humidity and rain.

Before placing the front wall, the figure of the entrance is cut, in this case a figure of a cat, so that there is no confusion, if you like you can make some windows, in my case I did not do it because at night it is very cold.

A kind of fence was placed on the roof that is going to serve as a terrace for you to have in the afternoons, and the gabled roof was placed over the entire house, on top of which an insulating asphalt layer was placed, since it may fall on it rain and thus protect it.

So that it does not take the house and leave the cat without shelter, place a screw inside the house and screw it in place, and it does not move; In this way I can remove it and put it wherever I want, without the possibility that friends of others take it away.

Thank you for visiting my blog. If you like posts about #science, #planet, #politics, #rights #crypto, #traveling and discovering secrets and beauties of the #universe, feel free to Follow me as these are the topics I write about the most. Have a wonderful day and stay on this great platform :) :)

! The truth will set us free and science is the one that is closest to the truth!