Características y Proceso de los Moldes para la Fabricación de Plásticos//Characteristics and Process of Molds for Plastics Manufacturing

avatar

image.png

image.png

Spanish

Bienvenidos a una nueva publicación

Hola amigos de hive espero que se encuentren muy bien, en el día de hoy quería compartir con todos ustedes las características y proceso para el mantenimiento de los moldes para la fabricación de envases y utensilios plásticos, espero que sea de su agrado comencemos.

English

Welcome to a new publication

Hello friends of hive I hope you are very well, today I wanted to share with you all the characteristics and process for the maintenance of the molds for the manufacture of plastic containers and utensils, I hope you like it, let's start.

image.png

Spanish
Los moldes para la fabricación de platicos son de gran tamaño y peso hechos en hierro o otros tipos de materiales según lo indique el proceso o la maquina donde será instalado, en su gran mayoría los moldes tienen que poseer una calefacción con resistencias y una refrigeración aparte ambas colocadas de la siguiente manera.
English
The molds for the manufacture of plastics are of large size and weight made of iron or other types of materials as indicated by the process or the machine where it will be installed, the vast majority of the molds have to have a heating resistances and a separate cooling both placed as follows.

image.png

Spanish
1.- distribuidores: estas son resistencias de gran tamaño y potencia, están colocadas en el interior de los moldes para calentar las zonas de entrada del plástico hacia el molde llevándolo hasta la salida.
English
1.- distributors: these are resistances of great size and power, they are placed inside the molds to heat the entrance zones of the plastic towards the mold taking it to the exit.

image.png

image.png

Spanish
2.- cavidades o puntas: son resistencias de menor tamaño y potencias ubicadas de manera que esta sea la salida del plástico y tome la forma deseada según la necesidad de la fábrica.
English
2.- cavities or tips: these are smaller size and power resistors located in such a way that this is the exit of the plastic and take the desired shape according to the needs of the factory.

image.png

Spanish
3.- aire expulsor: se ubican en las puntas de las cavidades para terminar el proceso expulsando el producto ayudando a reducir obstrucciones.
English
3.- expelling air: they are located in the tips of the cavities to finish the process by expelling the product, helping to reduce obstructions.

image.png

Spanish
4.- agua fría: se utiliza agua fría de torre de enfriamiento o chiller en ciertos tipos de moldes para refrigerar algunas zonas necesarias para la formación correcta del plástico.
English
4.- cold water: cold water from a cooling tower or chiller is used in certain types of molds to cool some areas necessary for the correct formation of the plastic.

image.png

Spanish
Existen gran cantidad y variedad de moldes no solo para el área de plásticos también en áreas de embutidos y procesos para toda clase de producción, en la industria es muy común encontrarse con algún tipo de molde para dar forma, tamaño y letras troqueladas en productos.
English
There are a large number and variety of molds not only for the plastics area but also in the areas of sausages and processes for all kinds of production, in the industry it is very common to find some kind of mold to give shape, size and stamped letters in products.

image.png

Spanish
Espero que les haya gustado y les pueda servir de ayuda, muchas gracias por llegar hasta el final nos vemos en la próxima publicación.
English
I hope you liked it and that it can be of help, thank you very much for reaching the end, see you in the next publication.

image.png

image.png



0
0
0.000
1 comments
avatar

De nuevo un post que me deja esperando con la curiosidad, cual es la forma de plastico que dan estos moldes, ¿Que formas tiene el producto final? Falto una foto de ello para quedar perfecta la publicacion jajaja.

0
0
0.000