[ENG-ESP] TENDRILS IN TREND

avatar

20230731_105321_0000.png

WELCOME TO MY BLOG

Hellooooo, hellooooo! Jewelery makers. Today I want to share two models of tendrils that are in trend. The first has to do with the theme that has turned the world upside down. The Barbiecore trend has crossed borders and has gone viral in such a way that even the most adult wants to be part of it. That is why I bring you some earrings that are super easy to make for when you want to participate in any of the events and you want to wear a representative garment of this trend in your outfit.

Like barbiecore, everything that glitters is also on trend in jewelry. From the simplest as glitter, to the finest piece with swarovski, although my personal opinion has never gone out of style, currently the trend is to wear accessories that dazzle with so much shine. So for this I also made both pieces with frosted foam. This in order to make an accessory made quickly, very easy to do, extremely economical and that meets all the requirements for the moment. I hope you like them.

BIENVENIDOS A MI BLOG

¡Holaaaa, holaaaaa! Creadores de bisutería. Hoy les quiero compartir dos modelos de zarcillos que están en tendencia. El primero tiene que ver que lo temática que ha puesto al mundo de cabeza. La tendencia Barbiecore ha traspasado las fronteras y se ha viralizado de tal manera que hasta el más adulto quiere formar parte de ella. Es por ello que les traigo unos zarcillos super fáciles de hacer para cuando quieras participar en alguno de los eventos y quieres llevar en tu atuendo una prenda representativa de esta tendencia.

Al igual que barbiecore, también está en tendencia en bisutería todo lo que brilla. Desde lo más simple como la escarcha, hasta la más fina pieza con swarovski, aunque mi criterio personal, nunca ha pasado de moda, actualmente la tendencia es llevar accesorios que deslumbran por tanto brillo. Así que para esto también realicé ambas piezas co foami escarchado. Esto con la finalidad de realizar un accesorio elaborado de manera veloz, muy fácil de hacer, sumamente económico y que reúna todos los requisitos para el momento. Espero que te gusten.


Polish_20230730_142834902.jpg

MATERIALS

  • Frosted foami (Purple, lila, pink, black, silver and white)
  • 2 pairs of hooks for tendrils
  • 4 hoops of 5 mm
  • 2 black mustaches
  • Liquid silicone
  • White glue
  • Shaded cotton thread (black and white)
  • Iridescent Frost
  • Stick height
  • Scissors
  • Rule of shapes

MATERIALES

  • Foami escarchado (Morado, lila, rosado, negro, plateado y blanco)
  • 2 pares de anzuelos para zarcillos
  • 4 aros de 5 mm
  • 2 mostachones negros
  • Silicón líquido
  • Pega blanca
  • Hilo de algodón matizado (negro y blanco)
  • Escarcha tornasol
  • Palillo de altura
  • Tijeras
  • Regla de formas

STEP BY STEP // PASO A PASO


MODEL #1

BARBIE TENDRILS

We begin by making the silhouette of Barbie in the purple frosted foam. Two pieces for the pair of tendrils. We cut.

MODELO #1

ZARCILLOS BARBIE

Comenzamos realizando la silueta de Barbie en el foami escarchado morado. Dos piezas para el par de zarcillos. Recortamos.


Polish_20230730_135025981.jpg

With the shape ruler we are going to make two circles of 2.5 cm in diameter in the purple foam and two of 2 cm in diameter in the pink foam. We cut.

Con la regla de formas vamos a realizar dos círculos de 2,5 cm de diámetro en el foami lila y dos de 2 cm de diámetro en el foami rosado. Recortamos.


Polish_20230730_135108207.jpg

Now with the three pieces cut, we proceed to form the model for our tendrils. On the back of the Barbie silhouette we place a silicone dot and glue the 2.5 cm circle. Then in that same circle, from behind, we place another dot of silicone and paste the pink one.

Ya con las tres piezas cortadas, procedemos a formar el modelo para nuestros zarcillos. Por la parte trasera de la silueta de Barbie colocamos un punto de silicón y pegamos el círculo de 2,5 cm. Luego en ese mismo círculo, por detrás, colocamos otro punto de silicon y pegamos el rosado.


Polish_20230730_135253847.jpg

With a needle we pierce the back of the pink foami to insert the 5 mm ring and then the hook for tendrils. We repeat in the other pair.

Con una aguja perforamos por la parte trasera del foami rosado para insertar el aro de 5 mm y seguidamente el anzuelo para zarcillos. Repetimos en el otro par.


Polish_20230730_135352489.jpg

Here is the result. Bright, elegant and fashionable. Quick to do and you can attend your event wearing a trendy accessory.

He aquí el resultado. Brillantes, elegantes y a la moda. Rápido de hacer y podrás asistir a tu evento luciendo un accesorio en tendencia.


Polish_20230730_135440057.jpg

MODEL #2

The second model is about tendrils made with frosted foam and with a design made with nuanced cotton thread in one of the parts of the piece.

We begin by making three squares of different sizes and in black, silver and white foam using the shape ruler, ideal for these designs. The measurements for the squares are 2.5 x 2.5 cm; 2 x 2 cm and 1.5 x 1.5 cm. Once marked we cut them out.

MODELO #2

El segundo modelo se trata de unos zarcillos realizado con foami escarchado y con un diseño elaborado con hilo de algodón matizado en una de las partes de la pieza.

Comenzamos realizando tres cuadrados de distintos tamaños y en foami negro, plateado y blanco utilizando la regla de forma, ideal para estos diseños. Las medidas para los cuadrados son 2,5 x 2,5 cm; 2 x 2 cm y 1,5 x 1,5 cm. Una vez marcados los recortamos.


Polish_20230730_134202355.jpg

Cut two 90 cm strands of yarn, fold each one in half and roll to form a thicker 45 cm strand.

Cortamos dos hebras de hilo de 90 cm cada una, doblamos a la mitad cada una de ellas y enrollamos para formar una hebra de 45 cm más gruesa.


Polish_20230730_134247923.jpg

We take the 2.5 x 2.5 cm black square and place a silicone dot in the center. We will do this in both pieces.

Then we add a moderate amount of white glue and place the thread that we made previously and place it around the mostachón and roll up to completely cover the square. to finish we cut the remaining thread and glue with silicone.

Tomamos el cuadrado negro de 2,5 x 2,5 cm y colocamos un punto de silicón en el centro. Esto lo haremos en las dos piezas.

Luego agregamos una cantidad moderada de pega blanca y colocamos el hilo que realizamos anteriormente y lo colocamos alrededor del mostachón y enrollamos hasta cubrir totalmente el cuadrado. para finalizar cortamos el hilo restante y pegamos con silicón.


Polish_20230730_134437922.jpg

Next, we glue the three pieces to form the tendril design by placing a silicone dot in one of the corners of the silver square and we will glue it behind the one we made with the thread. Then we do the same with the white foami.

A continuación pegamos las tres piezas para formar el diseño del zarcillo colocando un punto de silicón en una de las esquinas del cuadrado plateado y la pegaremos por detrás de la que realizamos con el hilo. Luego realizamos lo mismo con el foami blanco.


Polish_20230730_134524329.jpg

With a brush we add a little white glue on the thread and we spray litmus frost.

Con un pincel agregamos un poco de pega blanca sobre el hilo y rociamos escarcha tornasol.


Polish_20230730_134655006.jpg

We pierce the smallest piece with a needle and place a 5 mm ring and the hook to form the tendril.

Perforamos con una aguja en la en la pieza más pequeña y colocamos un aro de 5 mm y el anzuelo para formar el zarcillo.


Polish_20230730_134738753.jpg

And so we get the second model. Practical, very easy to make and very cute.

Y así obtenemos el segundo modelo. Práctico, muy fácil de hacer y muy lindo.


Polish_20230730_134842120.jpg

Two pairs of earrings so easy to make that you will not stop looking cute and fashionable on any occasion. With the Barbie model you can attend your event and not clash and with the other model, you will shine so much that you will attract the eyes until you see how and with what material they are made. I hope you liked them. See you next time.

Dos pares de zarcillos tan fáciles de hacer que no dejaras de lucir linda y a la moda en cualquier ocasión. Con el modelo de Barbie puedes asistir a tu evento y no desentonar y con el otro modelo, brillarás tanto que atraerás las miradas hasta comprobar cómo y con qué material están hechos. Espero que te hayan gustado. Nos vemos en la próxima.


Polish_20230730_135552364.jpg

Polish_20230731_101215981.jpg

Polish_20230731_101400057.jpg



0
0
0.000
5 comments
avatar

Están hermosos, y me encanta la idea que son hechos con foami, y los hace livianos, gracias por compartir tu proyecto con nosotras

0
0
0.000
avatar

Holaaaaa, si son especiales para las que sufrimos de la cervical 🤭🤭 bien livianos. Me alegro que te gusten. Saludos.

0
0
0.000
avatar

Hermosos, livianos, ideales para ir al cine y muy en tendencia!! Gracias por compartir!

0
0
0.000
avatar

Hermosos, que mejor tema que barbie, buena explicación y fáciles para elaborar en casa

0
0
0.000
avatar

La verdad es que estos dos modelos se ven fantásticos, bueno, a mí me fascina este tipo de creaciones 😍
Cuando se trata de ser coquetas hay que echar mano a lo que hay, me atrae el hecho de lo fácil y rápido que se pueden hacer. Un verdadero resuelve para salir de apuros y andar bellas bellas. Gracias por dejarnos la idea 💡 ya tomé notas ☑️🙋✍️🤳

0
0
0.000