Decidí pulir los faros del carro con el uso de mopa para taladro y una crema súper efectiva (ESP-ENG)

avatar
(Edited)

Hola amigos, hoy decidí aplicar una nueva técnica para pulir los faros del auto. Les cuento que mi hijo ha intentado pulir los faros de su auto con el uso de diferentes productos que se recomiendan en INTERNET, como pasta de dientes, bicarbonato de sodio, etc....pero no ha logrado los resultados esperados, por lo que este fin de semana, mi hijo y yo decidimos quitar la pantalla acrílica de los faros, con la idea de pulir estas piezas por dentro y por fuera, pero con una nueva idea, una idea que se me ocurrió con la cual logramos devolverle el 85% de transparencia a la pantalla del faro.

IN ENGLISH:
Hello friends, today I decided to apply a new technique to polish the car's headlights. I tell you that my son has tried to polish the headlights of his car with the use of different products that are recommended on the INTERNET, such as toothpaste, baking soda, etc....but he has not achieved the expected results, so This weekend, my son and I decided to remove the acrylic screen from the headlights, with the idea of ​​polishing these pieces inside and out, but with a new idea, an idea that occurred to me with which we managed to return the 85 % transparency to the headlight screen.

image.png

Decidí pulir los faros del carro con el uso de mopa para taladro y una crema súper efectiva // I decided to polish the car's headlights with the use of a disk wool and a super effective cream.

Si amigos, este fin de semana mi hijo y yo decidimos quitar los faros del carro para remover la pantalla acrílica con la idea de limpiarla y pulirla por dentro y por fuera, la verdad, es un trabajo un poco complicado, ya que para remover la pantalla acrílica debemos debilitar poco a poco el pegamento, en este caso utilicé un secador para calentar el pegamento y así poderlo separar el borde de la pantalla y la base del foco, como les decía, es un trabajo que hay que hacerlo con mucho cuidado para no romper el borde de la lámina, para esto debemos tener mucha paciencia.

Yes friends, this weekend my son and I decided to remove the headlights from the car to remove the acrylic screen with the idea of ​​cleaning and polishing it inside and out, the truth is, it is a bit complicated work, since to remove the acrylic screen we must gradually weaken the glue, in this case I used a dryer to heat the glue so that we can separate the edge of the screen and the base of the focus, as I said, it is a job that must be done very carefully to Do not break the edge of the sheet, for this we must be very patient.

  • Lo primero es Retirar los faros del carro: / The first thing is to remove the headlights from the car:

image.png

  • Ahora viene la parte más complicada “Quitar la pantalla acrílica del faro”, bueno, difícil, difícil, no lo es, solo hay que hacerlo con mucho cuidado, para esto voy a utilizar un calentador, tipo secador, con el cual voy a calentar el borde del faro para debilitar el pegamento y retirarlo poco a poco sin hacer demasiada presión, aquí el truco es ir calentando poco a poco una pequeña parte del borde y a la vez separando las partes, para separarlas pueden usar una navaja, cuchillo o un destornillador plano:
  • Now comes the most complicated part “Removing the acrylic screen from the headlight”, well, difficult, difficult, it is not, you just have to do it very carefully, for this I am going to use a heater, type dryer, with which I am going to Heat the edge of the headlight to weaken the glue and remove it little by little without using too much pressure, here the trick is to gradually heat a small part of the edge and at the same time separating the parts, to separate them you can use a knife, a knife or screwdriver:

image.png

¡Dicen que la crema dental es excelente para pulir los faros quemados! ¿Qué opinan ustedes? // They say toothpaste is great for polishing burned out headlights! What do you think?

De verdad no me quedaré con esa duda, así que haré esta prueba: // I really won't stay with that doubt, so I'll do this test:

  • Una vez retirada las dos pantallas acrílica de los focos, ahora voy a extender una capa de crema dental por toda la superficie del faro, aunque ya mi hijo había hecho una prueba con esta crema dental, quiero volverla a usar, pero esta vez utilizando un disco de mopa para taladro, bueno amigos, lo que quiero es saber si en realidad, la pasta dental sirve o no sirve para pulir las pantallas de los focos de carros:
  • Once the two acrylic screens have been removed from the lights, I am now going to spread a layer of toothpaste over the entire surface of the headlight, although my son had already done a test with this toothpaste, I want to use it again. use, but this time using a drill mop disc, well friends, what I want is to know if toothpaste is actually useful or not useful for polishing car headlight screens:

image.png

Resultado: Oye amigos, les voy a decir la verdad, la crema dental no me convenció, en realidad la pantalla se ve un poco mejor, pero no quedó como lo esperaba, aun se quedó opaco, a pesar que estuve un buen rato tratando de aclarar un poco más el acrílico, así que usaré una nueva técnica para tratar que el acrílico de la pantalla quede lo más transparente posible.

Result: Hello friends, I'm going to tell you the truth, the toothpaste did not convince me, the truth is the screen looks a little better, but it did not turn out as I expected even though I tried to lighten the acrylic a little more, so I will use a new technique to try to make the acrylic on the screen as transparent as possible.

Les traigo una nueva idea para pulir las pantallas de los focos: // I bring you a new idea to polish the acrylic headlight screen:

La idea es lijar toda la pantalla del faro con lija de agua grano 600 y luego aplicar "crema neutra" para pulir zapatos, ahora ustedes me preguntarán, ¿De donde surge esa idea? bueno amigos, esta idea me vino a la mente cuando recordé que hace muchos años, yo pulía la pantalla de mi reloj con una hoja de una planta que era como un abrasivo y luego le aplicaba crema de zapato y de verdad, la pantalla del reloj quedaba bien pulida y sin rayas, así que de aquí surge esta idea.

The idea is to sand the entire headlight screen with 600 grit sandpaper and then apply "neutral cream" to polish shoes, now you will ask me, where does that idea come from? well friends, this idea came to mind when I remembered that many years ago, I polished the screen of my watch with a leaf from a plant that was like an abrasive and then I applied shoe polish and, really, the screen of the watch It was well polished and without scratches, so that's where this idea comes from.

  • Así que voy a lijar estas pantallas por ambos lados, con la lija de agua grano 600 para remover la capa quemada y a la vez pulir la superficie, para hacer este trabajo, es preciso mojar constantemente la superficie de la lámina y la lija. Este proceso lo repetí dos veces.
  • So I am going to sand these screens on both sides, with 600 grain wet sandpaper to remove the burnt layer and at the same time polish the surface, to do this work, it is necessary to constantly wet the surface of the sheet and the sandpaper. I repeated this process twice.

image.png

  • Después de lijar la superficie de las dos pantallas, ahora voy a extender una capa de la crema neutra para zapato, por ambos lados de la lámina, y espero unos 10 minutos, luego comencé a pulir los faros con el uso de un disco con mopa para taladro, este proceso se repite de dos a tres veces lo cual es suficiente para que estos faros brillen casi como nuevos:
  • After sanding the surface of the two screens, I am now going to spread a layer of the neutral shoe cream, on both sides of the sheet, and wait about 10 minutes, then I began to polish the headlights with the use of a disc with drill mop, this process is repeated two to three times which is enough for these headlights to shine almost like new:

image.png

image.png

image.png

image.png

Miren como quedaron las pantallas de los faros después de este proceso: // Look how the headlight screens look after this process:

image.png

image.png

image.png

Oye amigos, qué bueno es cuando hacemos un trabajo y conseguimos un buen resultado, mi hijo y yo nos sentimos muy contentos con este resultado, porque las pantallas de los faros mejoraron en un 85%, de manera que ahora puedo decir, que la lija y la crema son de zapatos, son muy eficaces para pulir los faros de los carros, la crema dental también aclaró un poco el acrílico, pero la lija y la crema neutra de zapatos, fueron superiores porque le devolvieron lo transparente al acrílico.

Hey friends, how good it is when we do a job and get a good result, my son and I are very happy with this result, because the headlight screens improved by 85%, so now I can say, that the sandpaper and the shoe cream, they are very effective for polishing car headlights, the toothpaste also lightened the acrylic a little, but the sandpaper and the neutral shoe cream were superior because they made the acrylic transparent again.

Hello friends, how good it is when we do a job and get a good result, my son and I are very happy with this result, because the headlight screens improved by 90%, so now I can say that the sandpaper and the cream for shoes. , are very effective for polishing car headlights, the toothpaste also lightened the acrylic a little, but the sandpaper and neutral shoe cream were superior because they made the acrylic transparent again.

Bueno amigos hasta aquí, esta publicación, en una próxima publicación les mostraré la colocación de estas pantallas en la base de los faros, porque antes de hacer este trabajo, mi hijo quiere colocar en la parte interna del faro, una luz led tipo lineal, la cual viene en forma de cinta, así que después de colocar estas pantallas sobre los faros, inmediatamente los colocaré en el carro, y así comparar el estado en que se encontraban antes y después" de la reparación, así que hasta una próxima publicación, saludos.

Well friends, that's all for this post, in a next post I will show you the placement of these screens at the base of the headlights, because before doing this work, my son wants to place a linear LED light inside . headlight, so after placing these screens on the headlights, I will immediately place them on the car, and thus compare the before and after" of the repair, until a future publication, greetings.



0
0
0.000
11 comments
avatar

Wow this is amazing technique. I really love this because i have gotten a new ideas. I will give a try to it. Thanks for sharing this technique with me

0
0
0.000
avatar

It is good to test new ideas until you find the ideal one. There are those who recommend so many methods, but to know if that is true, you have to put them into practice.

0
0
0.000
avatar

Excelente técnica muy alternativa de verdad, yo hago un procedimiento similar, lo he compartido por aca en par de ocasiones también, pero con compuesto abrillantador de 3M 06064, lo que me falta es pulirlo como lo hizo usted, pero tengo que hacerlo cada mes porque se vuelven a poner amarillos, alguien me recomendó que luego de lijarlos y pulirlos, debo colocarles laca para que permanezcan así mas tiempo, pero la verdad me ha dado temor hacerlo, porque pulidos la laca se adherirá? Esa es la pregunta que siempre me hago.

0
0
0.000
avatar

Hola Daniel, bueno, casualmente a mi hijo le recomendaron barniz, y no le dí importancia, bueno al barniz también lo llaman laca, de manera que le ponen laca, sería cuestión de hacer una prueba. Saludos,

0
0
0.000
avatar

We never saw before the use of toothpaste as an abrasive for polishing, it is definitely a hack that should be taken into account, thanks for sharing the process, we loved the result.

0
0
0.000
avatar

Hola muy buena la técnica voy a ver si la pruebo, yo lo hago con una lija de grano 1200 y agua, se ve como el agua sale sucia y el faro queda limpio pero opaco y luego le coloco con un paño un poco de brasso líquido, dejo secar por uno minutos y luego lo pulo con un paño limpio y queda brillante.

0
0
0.000
avatar

Oye, buenisimo, no me conocia esa.

El secador es una pistola de calor o un secador de cabello?

Me llama ma atención para hacerlo con los stop de mi carro, imagino que puede funcionar también.

Las delanteras son de vidrio y tienen vida todavía.

0
0
0.000
avatar

Hola Ledcerv, es una pistola de calor, si los focos tienen algunas rayitas, puedes comenzar con lija 400, luego 600 puede seguir con la lija 1000, saludos.

0
0
0.000
avatar

Excelente mi amigo, que bueno que diste en el clavo con esta técnica, han quedado como nuevos los faros, seguramente le servirá de ayuda a muchos en esta comunidad. Saludos y gracias por compartir.

0
0
0.000
avatar

Importante para tener buena visión en las noches que buen post.

0
0
0.000