A mortarboard for my nephew. / Un birrete para mi sobrino. [ENG/ESP]
(Edited)
ENGLISH
Greetings @DIYHub community…

My nephew is graduating from preschool soon and will be starting first grade. Of course, because of the current situation in the country, there won't be any big celebrations (especially since he's only graduating from preschool). However, a few moms had already bought some things, like decorated graduation caps, to celebrate their children. The rest gave them things that some would take and others wouldn't, so it was decided that they should at least have their caps. Obviously, my sister asked me if I could make one, and even though it's at the end of the month, I wanted to make it right away, since the idea was still fresh in my mind. This led one mom to ask me to make one for her son; she provided the materials and everything, so it will probably turn out a little different. I'll share the process when I finish it. I really made it with whatever I had on hand; I didn't spend more than what my sister and I had between us. Of course, I need to replace some things, like the foam sheets, the cords, and other things, but little by little I can get there.
Note: The photos will be somewhat dark because I took them in low light. Thankfully, I had a device that allowed me to heat the hot glue gun, which is why I was able to do most of it.
Materials
- 1 kg of cardboard (in my case, I used some cardstock and old notebook covers because I didn't have any other).
- Navy blue fabric (if you have foam sheets of this color, you can substitute it).
- Navy blue ribbon and a darker shade of blue, between 2 and 3 meters long.
- Foam sheets in the colors you want; in my case, I used different shades of blue and glittery gold.
- Hot glue stick.
- Hot glue gun.
- Printed names and other figures (let your imagination run wild here).
- Gold or any color lace, ribbons, or cords; I personally used gold tones.
- Scissors.
- Double-sided foam tape.
- Any other materials you'd like to use for decorating.

Step by Step
STEP 1: Cut the shape from cardboard.
As I mentioned, I didn't have any heavy-duty cardboard, which would have been ideal, so I used some cardstock I had on hand and some small pieces of cardboard from notebook covers. At this point, I realized my sister didn't have any navy blue foam sheets, so I used some fabric of that color that she had. It was difficult to glue and cut properly, mainly because the fabric is quite thin. If it had been a thicker fabric, I think the job wouldn't have been so tedious. Spoiler alert: after I finished, I remembered I did have some foam sheets, but oh well, I'd already done it.

Ah, regarding the dimensions of the frame, the lid was 19x19 cm, while the circular part was 10 cm wide, and the length is adjusted to each person's head; mine was between 60 and 80 cm. Although, looking at it, the width would have been better at between 6 and 8 cm, because it felt too high.

STEP 2: Refining edges with tape.
Since it wasn't cut perfectly, I used a ribbon of almost the same color and tone to embroider all the edges, so it would look neater and the cardboard or any other imperfections wouldn't show. Because the glue gun isn't working very well, the dark blue ribbon didn't stick properly, so on the lid, the underside, I glued a gold ribbon to hide any loose glue or lifting, while on the top, I glued a lighter blue ribbon to give it a more vibrant look.

For the tubular part, the area facing inwards, I did the same as for the lid: a ribbon of the same color to hide the seam of the fabric. For the area that would go over the head, I used the same ribbon in a lighter blue than the one I used for the top of the lid.

STEP 3: Decorating in gold
I saw some gold cord among my things, so I used it to edge the lid (as you can see in the image) and underneath the tubular shape, just for decoration. I also used a simple lace ribbon on the top of the tubular shape.

STEP 4: Design for printing and cutting.
I searched on Pinterest for a chibi-style image of a child graduating, downloaded it, and used AI to modify the image so that he was raising his arms and looking happier. I printed the downloaded image full-body, and the modified image I cut in half. I added a blue bandana with my nephew's name on it, since this second image was intended to go on the top, specifically the cover.

For the lettering, I used the Again font, both for my nephew's name and the phrase "Heading to First Grade." I printed everything and cut it out as close together as I could with scissors, since I don't have a cutting machine.
Once everything was cut out, I would glue it onto the foam sheets, but here I used double-sided foam tape to give it that raised effect. Before printing, I noticed I didn't like the blue lettering, so I decided to add a gradient. It might have looked good as is, but I don't know, it just didn't appeal to me. So, using alcohol markers and white acrylic paint, I added a gradient and some highlights. You could skip this part if you prefer a flat color.

Then I glued the tape and the other side to the foam sheet. I would have cut it to the shape of the letter. I would have liked to have another color so that it would look better in relief, like the chibi of the child, which I glued first to the blue foam sheet and then to the gold one.
For the other chibi and the other phrase that would go on the top cover, I used only shades of blue and a cardstock that gives that iridescent effect; I didn't want so much gold for that area, so as not to overload it.

STEP 5: Paste the cutouts.
Here you can arrange them however you like. In my case, I just pasted the full-body chibi and my nephew's name on the sides; I thought about pasting them at the top so they were raised, but the idea didn't work out, so I just pasted them at the top and that's it.


STEP 6: Make the tassel and glue it on.
Here I used the gold lace ribbon I had, because I ran out of the cord, and with it some kind of fuzzy gold ribbon—I don't know what it was, I just saw it and thought it would look good—but after gluing it on, I didn't like it. So, with some gold thread, I made that tassel shape at the end by wrapping the thread around many times, tying it on one side, and cutting it on the other, so it would be loose. I don't know how to explain it any better, but I did my best. And, as an extra detail, I had some ribbon in the colors of the Venezuelan flag, which I added, and I straightened it with a hair straightener since it was folding unevenly.


Result….









This is my first time doing this. I didn't look for tutorials, just image references, and I went by what I wanted to include. One problem I have is that the hot glue gun and I don't get along, and you can clearly see the glue marks. But even so, I loved the result, and my nephew was thrilled. The best part is that someone else liked it so much that they asked me to make one for their son. So, to put it mildly, it didn't turn out badly. What do you think? And what other gluing methods do you recommend? Please.


Thank you for reading my post. I hope you enjoyed it. I'll be happy to answer your comments. You can visit my blog, follow my content, and connect with me on social media.

FACEBOOK / INSTAGRAM / TWITTER

ESPAÑOL
Saludos comunidad de @DIYHub…

Dentro de poco mi sobrino se gradúa de preescolar para pasar a su primer grado, claro está, por la situación que se vive en el país no se va hacer celebraciones ni cosas grandes (aunado que solo se gradúa de preescolar), no obstante, todas unas pocas mamás ya habían comprado ciertas cosas, como el birrete decorado para celebrarle a sus hijos, por lo que el resto les dio cosas que unos llevaran y otros no, por esto se decidió que por lo menos tuviesen su birrete. Obviamente, mi hermana me dice que, si lo puedo hacer y, a pesar, de que es a finales de mes, pero quise hacérselo de una vez, aprovechando que tenía la idea como que fresca y esto hizo que una mamá me mandara hacer el de su hijo, ella entregara los materiales y eso, por lo que quedará seguramente algo distinto, les traeré su proceso cuando lo termine de hacer. Realmente yo lo hice con lo que tuviese a la mano, no gaste más allá de lo que entre mi hermana y yo poseíamos, claro está, tengo que reponer algunas cositas, como los foamis, los cordones y otras cosas, pero poco a poco puedo ir haciéndolo.
Nota: las fotos estarán algo oscura porque lo hice en los momentos sin luz, gracias a Dios tenía un aparato que me permitía calentar la pistola de silicón, por ello pude hacer gran parte.
Materiales
-Cartón 1 en kilo, en mi caso, use unas cartulinas y tapas de cuaderno viejo, porque no tenia otro.
-Tela de color azul marino (si tienes foami de este color puedes sustituirlo con esto).
-Cinta de color azul marino y un azul de tono más elevado, de entre 2 a 3 metros.
-Foami de los colores que desea, en mi caso fueron azules de distintos tonos y un dorado escarchado.
-Barra de silicón.
-Pistola de silicón.
-Impresiones del nombre y otras figuras (aquí deja tu imaginación volar).
-Cordones, cintas o encajes dorados o del color que quieras, yo en lo personal usé tonos dorados.
-Tijera.
-cinta de espuma de doble cara
-Cualquier otro material que sirva para decorar.

Paso a Paso
PASO 1: Corte de la forma en cartón.
Como les dije, no tenía cartón 1 en kilo, que hubiese sido el ideal, usé una cartulina que tenía a la mano y unos cartoncitos de las tapas de los cuadernos. En este punto me di cuenta que mi hermana no tenía foami azul marino, por lo que recurrí una tela de ese color que tenía, lo que, si es que me costó pegarla y cortarla debidamente, más que nada porque la tela es de estas finitas, si hubiese sido una tela más dura, creo que el trabajo no hubiese sido tan tedioso. Spoiler: después de terminar me acordé que si tenía una, pero ya que, ya lo había hecho.

Ah, para le medida del cuadro, de la tapa fueron 19x19, mientras que, lo que seria la parte circular, pues fue 10cm de ancho y el largo si es acorde a cada cabeza, el mío fue entre 60 a 80 cm. Aunque viendo, el ancho hubiese sido mejor de entre 6 a 8 cm, porque lo sentí como muy levantado.

PASO 2: Afinando bordes con cinta.
Aquí como no quedó bien cortado, agarré una cinta casi del mismo color y tono, y bordé todas las orillas, para que quedara mejor presentado y no se notara que si el cartón u otra imperfección. Como la pistola no está muy bien, si me quedó mal pegado la cinta azul oscura, por lo que, en la tapa, la parte boca abajo, le pegué una cinta dorada, para que no se notara cualquier detalle de pega o levantamiento, mientras que, en la parte arriba, le pegué una cinta de azul más claro y así darle como más vida.

Para la parte tubular, la zona que da hacia adentro, si hice lo mismo que la tapa, una cinta del mismo color, para ocultar la unión de la tela, mientras que la zona que daría para la cabeza, la misma cinta de color azul más claro que usé la parte de arriba de la tapa.

PASO 3: Decorando en dorado
Aquí vi en mis cosas que tenía un cordón dorado, eso lo usé para bordear las orillas de la tapa (como verán en la imagen) y de bajo de la forma tubular, solo con fin de decorar, igualmente la cinta de un encaje sencillo en la zona superior de la forma tubular.

PASO 4: Diseñar para imprimir y recortar.
Busque en Pinterest la imagen de un niño graduándose en forma chibi, lo descargué y con la IA, modifique la imagen para que estuviese con los brazos levantando y más feliz. Imprimí esa que descargue en cuerpo completo y la otra que modifique con la imagen, lo recorte a la mitad, le puse como una bandana azul que tendría en el nombre de mi sobrino, ya que el destino de esta segunda imagen seria ir en la parte superior, en la tapa específicamente.

Para las letras, usé la tipografía Again, tanto para el nombre de mi sobrino como la frase “Rumbo a primer grado”. Imprimí todo ello y con la tijera me puse a recortar lo más pegado que podía, ya que no tengo maquina de corte.
Al tener todo recortado, lo pegaría en los foamis, pero aquí usé la cinta de espuma de doble cara, para dar ese toque relieve, pero antes noté que las letras en azul no me agradaban, antes de imprimirla debí como agregarle un degradado, puede que así de simple quedara, pero no sé, no me llamaba, así que con marcadores de alcohol y de acrílico blanco le di un degradado ahí unas luces. Podrían obviar esta parte si le gusta que el color fuese así plano.

Luego le pegue la cinta y la otra cara al foami, el cualquier recortaría a la forma de la letra, me hubiese gustado tener otro color para que se viera mejor en relieve, como el del chibi del niño, que lo pegué primero en el foami azul y luego en el dorado.
Con el otro chibi y la otra frase que irían en la tapa superior, si usé puros tonos azules y una cartulina que da ese efecto tornasol, no quería tanto dorado para esa zona, para no sobrecargarlo.

PASO 5: Pegar los recortes.
Aquí ya esos ordenarlos como mejor quieras, en mi caso, solo pegue a los lados el chibi de cuerpo completo y el nombre de mi sobrino; en la parte superior pensaba pegarlo de forma que estuviesen levantados, pero no me cuadro la idea, y solo los pegue arriba y ya.


PASO 6: Elaborar la borla y pegarla.
Aquí usé la cinta encaje dorada que tenía, porque ya no me quedaba del cordón y con ello unas como especie de cinta estas espelucadas doradas, no sé que era, solo lo vi y pensé que le quedaría, pero luego de haberlo pegado no me gustó y, con un hilo dorado elaboré esa forma de borla que tiene al final, que es darle vueltas al hilo muchas veces, amarrarlo en uno de los lados y del otro recortarlo, con el fin de que quede suelto. No sabría como explicarlo de mejor forma, pero hice mi esfuerzo. Y, como detalle extra, tenia una cinta de los colores de la bandera de Venezuela, para agregarle eso y con una plancha de cabello la acomodé, ya que se doblaba feo.


Resultado….









Es primera vez que hago esto, no busque tutoriales, solo referencias de imagen y me fui guiando bajo lo que yo quería ponerle. Un problema mío es que la pistola de silicón y mi persona no nos llevamos bien y claramente se ve los detalles del pegamento, pero aun así amé el resultado y mi sobrino super encantado, lo mejor de todo es que a alguien mas le gustó que me mandó hacer uno para su hijo, así que mal, que se diga mal, pues no me quedó ¿ustedes qué piensan? Y ¿qué otra forma de pegar me recomienda? por favor.


Gracias por leer mi post. Espero que les haya gustado. Estaré atenta a responder sus comentarios. Pueden visitar mi blog, seguir mis contenidos y redes sociales.

FACEBOOK / INSTAGRAM / TWITTER

0
0
0.000
A lovely piece of work. It's really interesting how you can create such a beautiful piece using materials that would otherwise end up in the trash; so, by combining recycled materials with beautiful, high-quality ones, you've created something truly beautiful.
I have picked this post on behalf of the @OurPick project! Check out our Reading Suggestions posts!
Please consider voting for our Liotes HIVE Witness. Thank you!
!discovery
This post was shared and voted inside the discord by the curators team of discovery-it
Join our Community and follow our Curation Trail
Discovery-it is also a Witness, vote for us here
Delegate to us for passive income. Check our 80% fee-back Program
quedo hermoso, está espectacular, muy bien
It turned out beautifully; it looks spectacular—really well done.