Diseño de un Gato en Inkscape [ESP/ENG]

avatar
Saludos amigos de Hive, hoy les presento el diseño de un gato, realizado en el programa vectorial Inkscape. A continuación les presento los pasos:


portada.png


Diseño de un Gato en Inkscape:

Paso 1:

Se abre programa Inkscape, y desde la barra de herramienta que está en el lado izquierdo presionamos clic en la opción de dibujar curvas Bézier y se traza una figura en forma ovalada que es la cabeza.

p01.png

En esta parte de curvas Bézier se selecciona la opción de Crear Trayecto Modo Trayecto BSpline, para que las forma queden de forma curvas.

Paso 2:

Se trazan en el centro el pecho del gato, la boca y la nariz, utilizando la misma herramienta.

p02.png

Paso 3:

Continuamos dibujando el cuerpo del gato y parte de la cola, con la herramienta de curvas Bézier.

p03.png

Paso 4:

Se traza en la parte de atrás la punta de la cola y parte del, con la misma herramienta.

p04.png

Paso 5:

Ahora procedemos a dibujar las dos orejas del gato, para esto se inserta seis figuras con la herramienta de curvas Bézier.

p05.png

Paso 6:

Comenzamos a dibujar el ojo derecho, para esto se trazan cinco círculos con la opción de crear círculos de la barra de herramientas y luego trazamos una figura ovalada que es la pestaña del gato, con la herramienta de curvas Bézier.

p06.png

Paso 7:

Seleccionamos todo el ojo derecho, lo duplicamos con la combinación de tecla Control + D, se le cambian las direcciones y lo desplazamos al lado izquierdo.

p06-1.png

Paso 9:

Se realizan doce líneas que están en diferentes posiciones con la herramienta de curvas Bézier.

p07.png

Paso 10:

Para darle mayor efecto se realizan diferentes trazos en el cuerpo del gato, con la herramienta de curvas Bézier.

p09.png

Paso 11:

Se selecciona el color comenzando por el ojo derecho, para esto hacemos clic en la figura y luego el color azul claro de la paleta de colores, que está en la parte inferior del programa.

p09-1.png

Continuamos aplicando el color al ojo izquierdo del Gato.

p09-1.png

Paso 12:

Continuamos seleccionando los colores en el resto de la figura.

p10.png

Paso 13:

Se eliminan algunos bordes de las figuras del gato, en la parte de la cabeza, para esto se seleccionamos una parte y luego nos vamos a la barra de menú Objeto – Rellenos y Bordes.

p11.png

Se visualizará un recuadro, donde vamos a cliquear en la pestaña color de trazo y luego para poder borrar el borde le damos clic en la X para eliminarlo.

p11-1.png

Paso 14:

Ahora procedemos a cambiar los bordes del resto de las figuras aplicando el paso 13.

p11-2.png

Paso 15:

Se duplica la figura, la agrupamos, se le cambia el color azul claro y los enviamos al fondo, para darle el efecto al Gato.

p12.png

Paso 16:

Para finalizar este diseño insertamos un fondo color negro y tenemos listo nuestro diseño del Gato.


portada.png

Imagen de Referencia Fuente

El programa Inkscape se puede descargar en esta dirección Fuente

Espero que les haya gustado mi tutorial, nos vemos en el próximo.

English

Greetings friends of Hive, today I present to you the design of a cat, made in the vector program Inkscape. Here are the steps:


cover.png


Cat Design in Inkscape:

Step 1:

Inkscape program opens, and from the toolbar on the left side we click on the option to draw Bézier curves and an oval-shaped figure is drawn, which is the head.

p01.png

In this part of Bézier curves, the Create Path BSpline Path Mode option is selected, so that the shapes are curved.

Step 2:

The cat's chest, mouth and nose are traced in the center using the same tool.

p02.png

Step 3:

We continue drawing the body of the cat and part of the tail, with the Bézier curves tool.

p03.png

Step 4:

The tip of the tail and part of the tail are traced on the back with the same tool.

p04.png

Step 5:

Now we proceed to draw the two ears of the cat, for this six figures are inserted with the Bézier curves tool.

p05.png

Step 6:

We begin to draw the right eye, for this we draw five circles with the option to create circles from the toolbar and then we draw an oval figure that is the cat's eyelash, with the Bézier curves tool.

p06.png

Step 7:

We select the entire right eye, duplicate it with the Control + D key combination, change its directions and move it to the left side.

p06-1.png

Step 9:

Twelve lines that are in different positions are made with the Bézier curves tool.

p07.png

Step 10:

To give it a greater effect, different strokes are made on the cat's body, with the Bézier curves tool.

p09.png

Step 11:

The color is selected starting with the right eye, for this we click on the figure and then the light blue color from the color palette, which is at the bottom of the program.

p09-1.png

We continue to apply the color to the Cat's left eye.

p09-1.png

Step 12:

We continue to select the colors in the rest of the figure.

p10.png

Step 13:

Some borders of the cat figures are eliminated, in the part of the head, for this we select a part and then we go to the menu bar Object – Fills and Borders.

p11.png

A box will be displayed, where we are going to click on the stroke color tab and then, in order to erase the border, we click on the X to eliminate it.

p11-1.png

Step 14:

Now we proceed to change the edges of the rest of the figures applying step 13.

p11-2.png

Step 15:

The figure is duplicated, we group it, we change the light blue color and we send them to the background, to give the effect to the Cat.

p12.png

Step 16:

To finish this design we insert a black background and we have our Cat design ready.


cover.png

Reference Image Source

The Inkscape program can be downloaded at this address Source

I hope you liked my tutorial, see you in the next one.

Translated with Traductor de Google

banner-cetb2008.png



0
0
0.000
5 comments
avatar

It is not that easy to draw a perfect cat with any software, you have used your art skill and made it a wonderful artwork. Simple amazing job man. Muchas Gracias

!hivebits

0
0
0.000
avatar

Greetings friend, thank you very much for your words towards my design, thank you for visiting my blog.

0
0
0.000